How to setup Multiple Network Interface in Windows 7


Multiple Network connection means more than one connection in your operating system. This means connect to internet + Local Area Connection at the same time. I think this connection is easy in Windows Xp operating system. Here i discussed how it is possible in Windows 7.

For Broadband connection:

If you are using broadband connection then one internet IP and connection must be given by the client server Pc. Setup this in your Windows 7 operating system. Then your internet network connection is available.

For Edge Modem or Wireless Router connection:
  • If you use Edge Modem or Wireless Router then first install the software with most recent version. After installing your Modem software connect to internet by click on connect. Now setup Local Area Connection. When you open your Pc it will automatically connect to Local Area Connection as Unidentified Network. Now dial your Internet connection. Right click on the network computer icon and open network and sharing center. Those two procedure shows in below.


  • Now click Change Adapter Settings then you see your two connection Edge + Local Area Connection. Your can desable or enable your connection from here. Shows below...





  • If you see there is some delay when you click network then go to your internet connection properties. Click networking and unchecked - shows below in picture...



  • Now you click network and see how fast your WorkGroup computer loads. When you need to browes your WorkGroup Pc click Network and it will loads fast.
Please feel free to comment on this article whether or not this article can help you.
Related Post:
How to setup Local Area Connection in Windows 7
Setup Home or LAN Network Cable Connection
How to configure LAN and Internet Connection in Windows XP

3 comments:

  1. I have 2 desktop systems in my home. one is Windows 7 (P4 board) OS , another one is xp (dual core) OS. Anti virus is AVG free edition in 2 computers. I'm using vodafone data card for internet connection. newly i connect direct LAN cable system to system. when i connect 1st time its worked. i don't know what happen suddenly , now a days i cant access other systems. the error message is WINDOWS CANNOT ACCESS //SYSTEM . how can i solve this problem? i didn't change any settings . i can see the work group computers in network place some time.even though i cant access . Please help me solve to this problem. what are settings is important ?

    ReplyDelete
  2. I have enjoyed reading your articles. It is well written. It looks like you spend a large amount of time and effort in writing the blog. I am appreciating your effort. . Windows Network Setup

    ReplyDelete
  3. thanks for the tutorial Bro..

    ReplyDelete